Crest-electronics CRE57074 RCC REMOTE SWITCH DEVICE 2.4 GHZ Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Panel sterowania Crest-electronics CRE57074 RCC REMOTE SWITCH DEVICE 2.4 GHZ. Crest Electronics CRE57074 RCC REMOTE SWITCH DEVICE 2.4 GHZ User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 8
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
CREST/ARISTO-CRAFT RCC REMOTE SWITCH DEVICE 2.4 GHZ
INSTRUCTION MANUAL CRE 57074
Features
1. Five Switch Ports
2. Multi-SW Functions [1T0 5]
3. Polarity Protection
4. Switch Type Speeds [ FAST / SLOW]
5. Switch in Use Busy Signal
6. Timer settings [ .5s To 5.0s]
7. Wide operating input voltage 6v To 24v DC
System Components
A.Remote Switch Device See Fig 1
Remote Switch Device Connections
BEFORE ANY INSTALLATION; MAKE SURE THERE IS NO POWER TO THE TRACK OR
TO THE REMOTE SWITCH DEVICE. The Remote Switch Device is designed to work on
track power or battery power of at least 6volts DC to a maximum of 24 volts DC. This unit is
self-protected for polarity and input current. Aristo Craft carries a battery box to work with the
Remote Switch Device, CRE 55612 if you do not have track power available.
This Remote Switch Device will handle from one to five switches or accessories each.
Page 1
Przeglądanie stron 0
1 2 3 4 5 6 7 8

Podsumowanie treści

Strona 1 - INSTRUCTION MANUAL CRE 57074

CREST/ARISTO-CRAFT RCC REMOTE SWITCH DEVICE 2.4 GHZINSTRUCTION MANUAL CRE 57074 Features1. Five Switch Ports2. Multi-SW Functions [1T0 5]3. Polarity P

Strona 2

Switches In the front of the Remote Switch Device there are six terminals five for switch hookups “SW -1 / SW –5” and one for power input “POWER –IN”.

Strona 3

Power Supply The Remote Switch Device can be connected directly to a power supply 6 volts to 24 volts or anywhere from your track layout. This unit

Strona 4

d. SW-TYPE: [1 –SLOW]: choose “FAST or SLOW” for the switch machines. Some switch machine need different setting for proper operation. To change the s

Strona 5

Return to the main screen on the Transmittera. Press the Menu button twice on the transmitter to return to the main screen. The Remote Switch Device s

Strona 6

Third line on the main LCD screen: SW –1: shows the first switch and direction SW –2: shows the second switch and direction SW –2: shows the

Strona 7

The arrow on the transmitter shows the direction of the switches. You only need to set up the switches once on the Remote Switch Device. The wires can

Strona 8

 MU MODE: OFF Press the right arrow to turn the MU mode ON Scroll down and press the right or left arrow to enter the Remote Switch Device desired f

Komentarze do niniejszej Instrukcji

Brak uwag